NEW TECHNOLOGY

TECHNOLOGY TO PREVENT THE BUILDUP OF STAINS

Toilet bowl inside. In an ordinary toilet bowl, water stains tend to form at the water suface level and flow lines. You scrub and scrub, but they still remain

1. Background Over time, ordinary ceramic surfaces tend to collect buildup of inorganic stain such as siliccate and lime, which aids in the accumulation of dirt and grime to toilets, sinks and other ceramic material surfaces. Typically, these stains tend to form at the waterline and flow lines within toilets, or around the faucet bases in sinks and basins. This buildup makes cleaning difficult, and at the same time degrades the glossy surface. PROGUARD is an INAX technology that acts to inhibit buildup of stain. This prevents stains from accumulating, which helps to preserve the smooth surface of the ceramic ware. The result is a surface look that, with only soft brushing, will recall the day it was purchased throughout the product lifespan.

Change of ordinary ceramic surface as seen through a microscope Secular.

On the ordinary ceramic surfaces, the buildup of lime and silicate is produced by achemical reaction between the ceramic surface and inorganic material. This chemical reaction causes the lime and silicate to bond to the surface.

 When PROGUARD is applied to the ceramic surface at the molecular level, it negates the chemical reaction that would ordinarily take place. This allows the toilet to maintain both glossy appearance and sturdy ceramic construction. The surface remains smooth and free of stain, it can be cleaned without hard scrubbing.

The right half of this toilet is traeated with PROGUARD, and the left half is untreated. When adye simulating minearal staining is applied, it is easy to see the buildup of stains on the unprotected side

Using electronic microscope, check surfaces of PROGUARD products. Ceramic surfaces of INAX sanitary ware still hold the original condition even after 5 years.

Investigation showed that 84% of people said that they had faced these problems and take more effort must have been conducted when cleaning the stains on the surface of sanitary of sanitary ware products.

• Do not use acid solution or detergents, alkaline solution and kind scrub brushes of hard.
• Using soft brushing, soft foam rubber, which don't scratch surfaces for cleaning:
  • Neutral detergent, liquid cleaner earless surface.
  • Cleaned with just enough light by these species are, or jam surface.

Document using for product have PROGUARD